VU meter head / level meter / DB audio power meter + Driver board L19-56

Description

Lamp Specifications:   White Backlight LED  2.8-3.6V  20mA   ( we will connect 2 Resistors on the VU header to change the backlight voltage to 12V)
Signal input
: The driver board provides two kinds of signal input methods, which can be arbitrarily selected according to your situation!
(Hint: If the signal is taken at the back end of the volume potentiometer or the output of the amplifier, the pointer swing will be controlled by the volume potentiometer, that is, the volume of the large pointer swings large, and the volume is small, the pointer swing is small.)
1   LOW, GND, LOW: This is the low-level signal input terminal of the driver board. It is used to connect the audio signals of the CD player, computer sound card, preamp, and other audio source devices. When wiring, LOW, GND, and LOW correspond respectively: Left,
The ground and right channel can be used.
(Adjust the two potentiometers on the driver board to control the size of the hand swing. If the signal is full, the pointer swing fails to reach your desired value, or the volume becomes small, you can press R2 on the driver board.
The R3 resistor is removed. R2 and R3 are the grounding attenuation resistors used when the driver board is connected to the high-level input signal. It is only used when the high-level input is used.
2:HIGH, GND, HIGH: This is the high-level signal input terminal of the driver board. It is used to connect the amplified power signal through the power amplifier. The attenuation circuit in the driver board will attenuate the high-intensity level of the amplifier output.
The driver IC, the attenuation circuit contains the resistors R2 and R3 just mentioned. When connecting the output terminals of the power amplifier, the two HIGH terminals of the driver board are respectively connected to the two red terminals of the power amplifier, and the two black terminals of the power amplifier.
Select one of the GND terminals of the driver board.
Drive output:
V+, V-, terminal: This is the two sets of 12V backlight power supply output terminals provided by the driver board for the backlight of the meter. Please pay attention to the voltage and positive and negative direction of the head light source when connecting.
+, -, terminal: This is the output terminal of the drive board drive meter, which is connected to the "+" and "-" terminals of the two level meters. Pay attention to the positive and negative directions when connecting.
3. Driver board Power supply parameters:
Works
voltage: AC or  DC 12-15V  (recommended to use a separate power transformer, or independent winding power supply!)
Rated power: 3W
4. Driver board PCB size: 60*39mm
Package include:  VU header   X 1
Driver board   X 1
connect cable   X 0.5M
we have the suitable case:
https://www.ebay.com/itm/123863627219
Shipping time:
Default send by airmail,about 15-22 business days can arrive most of europe countries, Russia, Brazil,Africa.Ukraine and some other remote countries will need some more days.
If you need it urgently,also can contact us for adding money using a faster courier(EMS,DHL,UPS or courier you designated)
Payment:
We ONLY accept PayPal. Payment must be made within 3 days of the auction end time. Non-Paying bidders will be reported.
All items will be shipped within 1-3 business days (from china)upon receipt of payment.
We ONLY send item to buyer's registered Paypal address,Buyer must be responsible for their postal address
Customs & duties:For cross-border transactions,.we are not responsible for tariffs and duties. However, buyers may be responsible for  actual, applicable tariffs, and duties as requested by respective country laws
Return & Exchange:
>> Some items return is accepted within 7 days after the buyer's receiving the item.(please see the detail describe)[In case of DOA (Dead on Arrival), please report within 3 days]
>> Returned item has to be new, unworn and in its original condition.
>> After getting the returned item, we will refund the customer at the item's price ( excluding the shipping costs to and from )